Do It Yourself Module

                                                                                                 

The ROTORWIND® winder module makes it easy for fabricators to design and build a custom winder system for a closet, safe or any special storage area. They are completely self contained units and operate on low voltage, readily available alkaline batteries.  With battery life measured in years, not months, there is no need for installing any high voltage electrical house wiring.

Installation is both quick and easy. Using a panel with a thickness of 3/8" (10mm), all that is needed is a bored 3-3/8" diameter hole for each module.  The module is inserted from the rear of the panel and held in place with 4 - 3/8" (10mm) wood or sheet metal screws.  Panels can be of heavier construction if desired.  Simply machine a "pocket" which is 4" x 4" for each unit leaving a 3/8" wall thickness. 

Each module is supplied fully assembled. All that is required is to connect the two 48" lead wires (red and black color) of each module to a 3 VDC battery holder. Holders for two (2) D cell alkaline batteries are available from Radio Shack ( Cat. No. 270-386 ) As many as four (4) modules can be connected to a single battery holder providing in excess of one year battery life. For longer battery life, use one holder for two modules. On/off control is accessible from the front of the panel as is a timing mode switch allowing for normal 10 minute operation or extended battery life 15 minute operation.  AC/DC adapters are also available.

Panels may be mounted vertically or tilted back 5° to 10° for fail-safe operation in the event that mounting cups are not positioned correctly.  Modules can be mounted on a 4" x 4" grid although the 6" grid shown on the first photo below provides adequate space for battery holders. Operation is virtually silent and there is absolutely no maintenance required. Modules are  guaranteed for 2 years operation but are designed to easily provide 8-10 years of life without attention. Dimensioned mounting drawings are available by clicking here.

 

 

                     

 

                

PART NO. DESCRIPTION

DIMENSIONS (inches)

WEIGHT (lbs)

LIST PRICE

W05050 Rotorwind® Module See above * 0.5

              $ 295.       

PN1057 Battery Pack For up to 4 Rotorwind® Modules

              $   10.

W05053 Programmable Module See above * 0.5

              $ 395.

AN1007 Power Supply For up to 20 Programmable Modules (115VAC/6VDC)

              $ 150.           

* Please note.  Dimensions shown are approximate.  Request Certified Drawing if dimensions are critical.
  HOME PAGE    COMPANY HISTORY    WINDER COLLECTION     CASE COLLECTION    GIFT COLLECTION    OUTLET STORE
       DEALERS     SUPPORT     GALLERIES     CONTACT US     MAILING LIST     CATALOGS/PRICES   
ROADSHOW

 

HOME PAGE
1 WATCH
2 WATCHES
3 WATCHES
4 WATCHES
5 WATCHES
6 WATCHES
9 WATCHES
12 WATCHES
16 WATCHES
28 WATCHES
40 WATCHES
MAILING LIST
CATALOGS/PRICES
ROADSHOW